MCC MIIC-203 Guia do Utilizador descarregar pdf (Página 36)

nearest available supported rate.

4.2.5 Enable /INT Signal Monitor

Monitor/INT (on INT supported adapters only. Default=OFF)

Enable /INT signal monitoring.

4.2.6 Stop On Busy

StopOnBusy (Default=OFF)

Stop sending I

C messages if the adapter returns a "Busy" response to the host

computer.

4.2.7 Stop On Arbitration Loss

StopOnArbLoss (Default=OFF)

Stop sending I

C messages if the adapter returns a "Bus Arbitration Loss" response

to the host computer. Bus Arbitration Loss occurs when another I

C Bus master

wins arbitration while the adapter is attempting to become a bus master.

4.2.8 Stop On Slave Negative Acknowledgment

StopOnNak (Default=OFF)

Stop sending I

C messages if the adapter returns a "Slave Not Acknowledging"

response to the host computer. Slave Not Acknowledging occurs when the adapter

is attempting to become a bus master and no slave device acknowledges the

transmitted slave address.

4.2.9 Beep On Busy

BeepOnBusy (Default=OFF)

Generate a host computer beep if the adapter returns a "Busy" response to the host

computer.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 76 77

Sem comentários

MCC MIIC-203 Guia do Utilizador Página 36