MCC MIIC-203 Guia do Utilizador descarregar pdf (Página 64)

host. The host should reissue the correct command.

iPort/AFM RS-232 Receive Buffer Overflow

Prompt: /I90[CR] ‘iPort/AFM RS-232 Receive Buffer Overflow

Cause: This event normally indicates that data sent to the iPort/AFM via the RS-232

serial port has been lost. Check the host computer’s RS-232 Serial Port Flow

Control (XON/XOFF, or Hardware) to make sure it matches current iPort/AFM

Flow Control. Also, check if the host computer’s FIFO buffers in its 16550 UART

are enabled. If so, reduce or disable Transmit Data Buffering. On Windows-based

host computers, see the Device Manager, COM port, Advanced Settings. You may

need to power down the host computer for any FIFO change to take effect.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 70 71

Sem comentários

MCC MIIC-203 Guia do Utilizador Página 64