MCC MIIC-203 Guia do Utilizador descarregar pdf (Página 22)

Advanced Set Up Screen

Advanced Set-up

On the Advanced Set-up screen you can set the following parameters:

1. iPort I

C Slave Address

Select iPort’s I

C slave address. iPort will acknowledge messages sent to

this address.

2 iPort General Call

Enabled allows iPort to respond to the I

C general call address (00).

General call is used to broadcast an I

C message to multiple devices.

3. I

C Bus Master Bit Rate (iPort, iPort/AFM)

The speed of the Bus will run. 100KHz is standard mode, 400kHz is fast

mode. Use other rates if you are having trouble talking to a very slow

slave device.

4. I

C Bus TimeOut (Msec) (iPort, iPort/AFM)

Control how long iPort will wait before reporting an I

C Bus intra-

message timeout. (0=None, 1...32767 msec)

___

5. Enable INT monitor (iPort/AFM only)

Enables monitoring of the INT signal state. INT state changes are

reported in the main screen Communications Events window.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29

Sem comentários

MCC MIIC-203 Guia do Utilizador Página 22